PDF Publication Title:
Text from PDF Page: 002
Capstone Turbine Corporation • 21211 Nordhoff Street • Chatsworth • CA 91311 • USA Work Instructions: TET Thermocouple Replacement – Model C60 MicroTurbine Required Tools 10mm socket for package removal 12 point 1⁄4” socket and 1⁄4” Drive and Extension 1⁄4” Torque Drive set to 45 in-lbs LPS Penetrating Compound Nickel-based Anti-seize Compound Procedures 1. Shut down the engine 3 hours prior to servicing. 2. Remove all power sources and fuel supply from the MicroTurbine system 3. Remove the MicroTurbine side panels to gain access to the engine rear section 4. Locate the TET thermocouple on the rear center of the MicroTurbine 5. Disconnect the connector joining the thermocouple to the Engine Harness 6. Spray the bolts with penetrating compound. Wait for five minutes. 7. Spray the bolts with penetrating compound again. Wait for five minutes. 8. Use the 12-point 1⁄4” socket, drive and extension to remove the four bolts. IMPORTANT: If any resistance is felt while removing the bolts DO NOT PROCEED! Spray more penetrating compound and wait. Due to the thermal expansion in this region, removal of bolts may be difficult. 9. Remove TET sensor 10. Replace the TET sensor. 11. Apply nickel-based anti-seize compound to the threads of the new bolts. 12. Insert bolts and tighten using fingers. 13. Use the 45 in-lb torque drive to tighten the TET thermocouple to engine bolts. DO NOT over tighten. 14. Connect the TET thermocouple cable to the Engine Harness 15. Turn on power and fuel supply. 16. Initiate an engine start. 17. Test the system for proper operation as detailed in the MicroTurbine User’s Manual. Responsibility It is the responsibility of Capstone to make these procedures available to the Authorized Service Providers so they can successfully complete this task. It is the responsibility of the Authorized Service Providers to read this document, understand its contents, and effectively complete the replacement procedures. 440027-001 Rev A (December 2002) Page 2 of 2 This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | Work Instructions TET Thermocouple Replacement Capstone Model C60 MicroTurbine
PDF Search Title:
Work Instructions TET Thermocouple Replacement Capstone Model C60 MicroTurbineOriginal File Name Searched:
440027_C60_TET.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
| CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com | RSS | AMP |