PDF Publication Title:
Text from PDF Page: 006
Capstone Turbine Corporation • 21211 Nordhoff Street • Chatsworth • CA 91311 • USA Technical Reference: Stand Alone Operation – Capstone Model C30 and C60 Stand Alone Operation System Sleep in Stand Alone Mode The MicroTurbine enters Sleep Mode to conserve battery power during prolonged periods of inactivity. This reduction in battery draw can significantly extend the MicroTurbine battery charge. Sleep Mode inactivity time can be adjusted, and this feature may be configured to activate automatically. If the battery isolation switch is set to ON, and the display panel is dark, the system is most likely in Sleep Mode. To manually place the MicroTurbine in a sleep mode: • CRMS: Not Applicable • Display panel: Pressing the INTERLOCK and DISABLE buttons simultaneously after the MicroTurbine has transitioned to Standby mode also results in system sleep. Waking a Stand Alone MicroTurbine If the Stand Alone system is in Sleep Mode, pressing the BATT START button at the far left of the Display Panel (for less than or equal to 2 seconds) will wake it up. If using remote communication, the modem ring indicator will wake up a sleeping Stand Alone system. Alternately, momentarily closing the battery start contacts in the communications bay will also wake up the system. This must be a momentary closure of 0.1 to 2.0 seconds only, as permanent closure of these UCB wakeup contacts will completely discharge the battery. See Figures 1 and 2 for location of battery start momentary contacts on the UCB. Stand Alone Mode Enable If the Stand Alone Interlock is open, the system will accept the command but post an SA Interlock Fault. If no battery is detected, a No Battery Fault is reported. The MicroTurbine can be configured to recognize Stand Alone mode using the display panel or CRMS. To configure the MicroTurbine to operate in Stand Alone mode: • CRMS: Select Settings > Control Settings, and set Power Connect slider to Stand Alone. • Display panel: Enter the user password (default is 87712370), and navigate as follows - System Data > System Configuration > Power Connect. Select Stand Alone mode, and then press the ACCEPT button. Starting a Stand Alone System After the BATT START wakes the MicroTurbine, the Stand Alone system may be started. A Start can be performed one of three ways: 1) Display panel, 2) CRMS or 3) A signal received through external switch contacts on the UCB. For external switch contacts to work properly, wiring connections to the attached device must be established before MicroTurbine software is configured to enable the switch (see “Configuring the Dispatch Modes – External Switch”) • CRMS: From the main panel, click on the Start button. • Display panel: Press and hold the INTERLOCK and START buttons simultaneously. 410028-001 Rev. C (July 2004) Page 6 of 22 This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction. NOTE NOTEPDF Image | Stand Alone Operation – Capstone Model C30 and C60
PDF Search Title:
Stand Alone Operation – Capstone Model C30 and C60Original File Name Searched:
stand_alone.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
| CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com | RSS | AMP |