PDF Publication Title:
Text from PDF Page: 017
6013 Internal Fault SYS CONFIG System Configuration Fault System Severity Level 6 The software protects the user from selecting a system configuration that is not supported by the installed hardware components. Symptom Probable Cause Analysis Repair Solution System in Stand-alone Mode and No Battery Found Battery Pack Cir- cuit Breaker Off with Grid Power Applied Grid power will provide voltage for DPC to operate, however, the battery pack must have bat- tery power to operate. Turn on Battery Circuit Breaker, press battery start button, and wait for 10 seconds for device to communicate with DPC. Stand-alone with Grid Power and Auto Sleep Timer times out After the AUTOSLP timer expires, the DPC will command the battery to sleep. If the DPC still has power, is in stand-alone mode, and can not communi- cate with a battery, then this fault is declared. Press battery start button and wait 10 seconds for battery to communicate with DPC IntraController Harness to Battery Not Secure Intermittent connection on the IntraController bus could cause power to flow from battery to DPC, but communications are unsuccessful. Secure IntraController connection to battery Battery Controller Failure Battery controller could provide power from battery start signal, but battery has controller com- munication failure. Replace Battery Controller (BCT). Invalid Utility Connec- tion Utility Connection has not been set. Systems may ship with an invalid utility connection. Executing the Set Default function from the display panel or RS232 port will cause the utility connection to default to an invalid setting. Set system utility connec- tion from display panel or RS232. Dual Mode Configura- tion Error A UCB relay not programmed as Mode Active Open In the Dual Mode operation, one of the UCB Relays should have the Mode function selected and configured as Active Open. Configure UCB relay set- tings from display panel or RS232. A UCB relay not programmed as Load Active Open In the Dual Mode operation, one of the UCB Relays should have the Load function selected and configured as Active Open. Configure UCB relay set- tings from display panel or RS232. Observe Safety Precautions - Refer to Important Safety Instructions for Details 511521-002 105 Troubleshooting Guide This information is confidential and proprietary to Capstone. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered.PDF Image | SERIES 6000 FAULT CODES Operational Faults
PDF Search Title:
SERIES 6000 FAULT CODES Operational FaultsOriginal File Name Searched:
06_6000Faults.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)