PDF Publication Title:
Text from PDF Page: 005
4011 Internal Fault SW COMPATIBILITY Software Compatibility System Severity Level 7 Software compatibility testing is required to ensure that damage cannot be induced when operating with different configurations of hardware. Verification of the following criteria is necessary to successfully pass the software compatibility check: When the DPC core part number is greater than or equal to 509247-100, the Generator and Inverter DSP software versions must be greater than or equal to 3.00. Software Compatibility fault is declared when the above criteria is not met. Recommended Spare Parts • Engine Personality Module • DPC Control • Frame Personality Module • Engine Harness Symptom Probable Cause Analysis Repair solution All of the software components required in the code set were not installed. Software does not recognize the Inverter or Generator part numbers as valid programs. Check software compo- nents through Display or SWCNFG command to ver- ify all components are correct. Download the required software (Inverter or Generator code). Software is installed to unsupported hard- ware components Configuration setting is wrong. Check system software configuration. Download control software configuration. Software does not recog- nize the part number of the DPC, Engine, Battery Controller, or Fuel Device as a valid component Check the system operation documentation for hardware compatibility issues. Re-program Personality Module for valid components. EEPROPM Device Failed Problem persists even when PM is re-programed Replace Personality Module. Note: The new PM must be programmed with appropriate P/N and S/N. Problem persists even when PM is replaced. Replace DPC Control Board (See Document 513176) Multiple faults are reported. Possible problem in the communication driver Replace DPC Control Board (See Document 513176) Note: Caution must be taken when reverting back to the old software as PM faults may occur. Observe Safety Precautions - Refer to Important Safety Instructions for Details 430001-001 Rev B (Sep 2002) 67 Troubleshooting Guide Capstone Turbine Corporation reserves the right to change or modify without notice the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | SERIES 4000 FAULT CODES Software Faults
PDF Search Title:
SERIES 4000 FAULT CODES Software FaultsOriginal File Name Searched:
09_430001 Series 4000.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
| CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com | RSS | AMP |