PDF Publication Title:
Text from PDF Page: 011
6011 Internal Fault FLAMEOUT START Engine Flameout During Start-up System Severity Level 3 The software detects if the engine is not sustaining combustion after it has begun accelerating. This fault is declared if the engine TET drops by more than a predetermined value and the fuel command increase by more than a predetermined value. Recommended Spare Parts - Gaseous Fuel • Shut-off Valve • Injector (6) • Inlet TC Monitoring Parameters • TET • Engine Speed • SPV25 • Ignitor • UCB • Pin • SPV% Command • Pin Transducer • Pout Transducer • Pout • Inlet TC • Manifold Block • Exciter • Solenoid States Symptom Probable Cause Analysis Repair Solution Combustion ceases during Start-up Fuel not turned On Check any externally installed fuel shutoffs to verify that fuel flow is obstructed. Open External Fuel Shutoffs Fuel BTU content different than what the system expects System uses Fuel Index values adjustable by the user to compute mass flow of fuel. Wrong settings can cause inadequate levels of fuel flow to achieve combustion. Set Fuel Indices Confirm Site Btu Content. Adequate fuel pressure not provided to system Gaseous fuel systems require a minimum inlet pressure to achieve adequate fuel flow. Adjust fuel pressure per system specification. External fuel gas booster failure. Troubleshoot fuel gas booster. Verify the Run signal from the UCB is present by checking the settings and relay functionality. Adjust settings. Replace UCB Board. Faulty TCIN Thermo- couple TCIN reads -4 °F. Replace faulty thermistor Voltage not provided to Solenoids Check and verify that voltage is being provided to shutoff valves and manifold. Check/Replace Solenoid Harness. Check Continuity. Continued on next page Observe Safety Precautions - Refer to Safety Instructions for Details 430013-001 Rev A (October 2002) 93 Model C60 Troubleshooting Guide This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | Overview SERIES 6000 FAULT CODES Operational Faults
PDF Search Title:
Overview SERIES 6000 FAULT CODES Operational FaultsOriginal File Name Searched:
11_430013_Series 6000.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)