PDF Publication Title:
Text from PDF Page: 024
Capstone Turbine Corporation • 21211 Nordhoff Street • Chatsworth • CA 91311 • USA Dual Mode System Controller (DMSC): User’s Manual • SA Fast Transfer Delay (Available in CRMS version 4.5X and higher) (Does not apply to C30, or C60 software v4.3X and lower) • Auto Enable Power • Start Input • Output Relay settings These can be accomplished using CRMS or the Display Panel on the MicroTurbine. Refer to Capstone Remote Monitoring System – User Edition (410013) for instructions to use CRMS. Refer to the MicroTurbine Model C65 User’s Manual (400017) or C200 User’s Manual (400008) for instructions to use the Display Panel. Power Connect Use CRMS or the Display Panel to set Power Connect to Dual Mode. The default setting for Power Connect is Grid Connect. Auto Restart Use CRMS or the Display Panel to set Auto Restart to Enable (YES [1] on the Display Panel). The default setting for Auto Restart is Disable (NO [0] on the Display Panel). Grid Reconnect Delay Use CRMS or the Display Panel to enter a value in the range of 5 to 30, in minutes, for the Grid Auto Reconnect Delay time. The default, and minimum, value is 5. Grid Reconnect Toggle Use CRMS or the Display Panel and make sure that Grid Reconnect (Enable Mode on the Display Panel) is set to AUTO, which is the default. Stand Alone (SA) Load Wait Use CRMS or the Display Panel to enter a value in the range of 5 to 30, in minutes, for the SA Load Wait time. The default, and minimum, value is 5. SA Fast Transfer Delay Use CRMS or the Display Panel to enter a value in the range of 0 to 30, in minutes, for the SA Fast Transfer Delay time. The default, and minimum, value is 0. Auto Enable Power Use CRMS to set Auto Enable Power to ON. This can also be done with the RS-232 command AUTOLD = 1. The default is OFF or 0. Start Input Use CRMS to set Start Input. For Dual Mode operation, set Start Input to “GC User/SA Remote.” This can also be done with the RS-232 command STRINP = 2. For Standby only operation, set Start Input to “Remote.” This can also be done with the RS-232 command STRINP = 1. The default setting for Start Input is “User,” or 0. 400023 Rev A (October 2008) Page 24 of 27 Capstone reserves the right to change or modify, without notice, the design, specifications, and/or contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | DUAL MODE SYSTEM CONTROLLER (DMSC) USER’S MANUAL
PDF Search Title:
DUAL MODE SYSTEM CONTROLLER (DMSC) USER’S MANUALOriginal File Name Searched:
400023A_Dual_Mode_System_Controller_UM.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)