Stand Alone Operation – Capstone Model C30 and C60

PDF Publication Title:

Stand Alone Operation – Capstone Model C30 and C60 ( stand-alone-operation-–-capstone-model-c30-and-c60 )

Previous Page View | Next Page View | Return to Search List

Text from PDF Page: 020

Capstone Turbine Corporation • 21211 Nordhoff Street • Chatsworth • CA 91311 • USA Technical Reference: Stand Alone Operation – Capstone Model C30 and C60 Over Voltage The system will initiate a shut down if the voltage rises above this setting for a user-selected timer value. Over Voltage delay establishes the period for any phase voltage to rise above the Over Voltage set point limit. • CRMS: From the menu, select: Settings > Stand Alone Voltage and Frequency Settings, and enter the desired Over Voltage value. • Display panel: Navigate as follows - Stand Alone > Over Voltage, and configure settings. Over Voltage Sets over voltage limit for shutdown if 528 –480 VRMS 524 operating voltage exceeds this value. 10.0 – 0.00 sec 1.9 Soft Start Voltage The MicroTurbine may be configured to begin exporting power at less than nominal voltage and frequency, and then linearly ramp to nominal values over a selected time period using the Soft Start Voltage setting. The Soft Start Voltage (0 to 480 V) setting is typically used to enable the MicroTurbine to start a motor (or other loads), which cannot handle full load current immediately. This parameter differs from the Operating Voltage setting (150 to 480 V), which represents the load voltage at normal operating conditions. When the output contactor closes, the system will provide demanded current at this starting voltage and immediately begin increasing the voltage at the configured rate, up to the nominal voltage. Ramp Rate Volts per Second establishes the rate of voltage increase. When the output contactor closes, the system will provide demanded current at the voltage established above and immediately begin increasing the voltage at this rate. • CRMS: From the menu, select Settings > Stand Alone Voltage and Frequency Settings, and enter the desired Start Voltage and Voltage Ramp values. • Display panel: Navigate as follows - Stand Alone > Volts Start/Ramp, and enter the starting voltage and rate of voltage/sec. Volt Start Sets start voltage and voltage rate to 0 –480 VRMS 0 Ramp < VRMS /sec> provide output voltage to connected loads. 3 - 6000 VRMS//sec 3000 Frequency The Frequency setting establishes the normal operating MicroTurbine frequency. • CRMS: From the menu, select Settings > Stand Alone Voltage and Frequency Settings, and enter the desired Frequency value. • Display panel: Navigate as follows - Stand Alone > Frequency. Frequency Sets the initial nominal output frequency. 10 – 60 Hz 60 410028-001 Rev. C (July 2004) Page 20 of 22 This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction. Stand Alone Menu Parameter Description Parameter Value Default Stand Alone Menu Parameter Description Parameter Value Default Stand Alone Menu Parameter Description Parameter Value Default

PDF Image | Stand Alone Operation – Capstone Model C30 and C60

PDF Search Title:

Stand Alone Operation – Capstone Model C30 and C60

Original File Name Searched:

stand_alone.pdf

DIY PDF Search: Google It | Yahoo | Bing

Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info

Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info

Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info

Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info

BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info

Publications: Capstone Turbine publications for microturbine and distributed energy More Info

FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info

CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info

Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info

CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)