Technical Reference Horizontal Fuel Gas Booster - Model C60/C65 MicroTurbine

PDF Publication Title:

Technical Reference Horizontal Fuel Gas Booster - Model C60/C65 MicroTurbine ( technical-reference-horizontal-fuel-gas-booster-model-c60-c6 )

Previous Page View | Next Page View | Return to Search List

Text from PDF Page: 007

Capstone Turbine Corporation • 21211 Nordhoff Street • Chatsworth • CA 91311 • USA Technical Reference: Horizontal Fuel Gas Booster - C60/C65 MicroTurbine Installation Procedure Software Setup Program the MicroTurbine software before any electrical connections to the Fuel Gas Booster as follows: 1. Ensure that there are no electrical connections between the MicroTurbine and the Fuel Gas Booster. 2. Power up the MicroTurbine. 3. Program the output relays as follows: Using the control panel on the MicroTurbine, proceed as follows: a. On the UCB Relays menu, Relay #1 submenu, set EXT LOAD to ACTIVE CLOSED. b. On the System Settings menu, Fault Input #1 submenu, set Fault Input #1 to ENABLE (Fault signal from FGB). On Fault Input #1 submenu, set SSL to 3 and time to 12 seconds. 4. Power down the MicroTurbine. Electrical Connections NOTE The Capstone software must be set up to treat the Fuel Gas Booster as an External Auxiliary Load. Any of the output relays may be configured to perform this function; however, the specified wiring connections demonstrate the use of Relay #1. NOTE Fuel Connections are described on the following pages, and should only be made after the Electrical Connections are all in place. When installing the Fuel Gas Booster, the electrical connections between the Fuel Gas Booster and the MicroTurbine must be performed in the following sequence to avoid failure and prevent and voiding of the warranty. Installation, operation and maintenance shall be performed only by a licensed electrical contractor, in accordance with NEC/NFPA 70 and local/federal electrical codes. Control Interface CAUTION The power and signal wires must be installed in separate conduit. 1. Prepare the control interface electrical connections as follows: a. The signal wiring between the Fuel Gas Booster and the Model C60/C65 must be shielded, 20 AWG 2-pair. All of the signal wiring must be enclosed within a 1/2-inch, weatherproof flexible steel conduit. b. Always ground the electrical cable shield to the chassis on the MicroTurbine side. 410047 Rev F (February 2006) Page 7 of 14 This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.

PDF Image | Technical Reference Horizontal Fuel Gas Booster - Model C60/C65 MicroTurbine

PDF Search Title:

Technical Reference Horizontal Fuel Gas Booster - Model C60/C65 MicroTurbine

Original File Name Searched:

410047_Fuel_Gas_Booster_Horiz.pdf

DIY PDF Search: Google It | Yahoo | Bing

Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info

Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info

Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info

Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info

BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info

Publications: Capstone Turbine publications for microturbine and distributed energy More Info

FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info

CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info

Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info

CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)