PDF Publication Title:
Text from PDF Page: 002
Capstone Turbine Corporation • 21211 Nordhoff Street • Chatsworth • CA 91311 • USA Service Bulletin SB0042: Checking Exhaust Dome Alignment – Model C30 MicroTurbine 3. Let the engine cool down for approximately three hours. 4. Mark the position of the exhaust dome thermal blanket against the engine. Cut the three tie wires that secure the thermal blanket to the engine. Gently, pull the thermal blanket away to expose the exhaust dome. CAUTION Although the following figures do not show the TET thermocouple, DO NOT remove the TET thermocouple when performing these procedures. V-Band Thermal Blanket Tie Wire Post (3 Sets) 5. Look directly into the four sight holes located around the edges of the exhaust dome under the V-band. If the exhaust dome is aligned properly with the engine, the edges of the exhaust dome and the engine will be flush in all four places. V-Band Sight Hole (4 Places) Exhaust Dome 6. If the exhaust dome is out of alignment, loosen the self-locking nut on the T-bolt sufficiently to allow the exhaust dome to move around. 450006-001 Rev A (September 2002) Page 2 of 4 This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction. CAUTION If the self-locking nut and T-bolt are seized, use a suitable cutting fluid to loosen them. In extreme situations, it may be necessary to cut the T-bolt and replace it with a new T-bolt and self-locking nut.PDF Image | Checking Exhaust Dome Alignment Model C30 MicroTurbine
PDF Search Title:
Checking Exhaust Dome Alignment Model C30 MicroTurbineOriginal File Name Searched:
SB0042_Checking_Exhaust_Dome_Alignment_C30.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)