PDF Publication Title:
Text from PDF Page: 009
Capstone Turbine Corporation 21211 Nordhoff Street Chatsworth CA 91311 Service Bulletin SB0107: C200 v1.20 Software Release through Y0 PLC output through K1 contactor coil. K1 coil contacts on closure to send an OK signal to JUCB J14 Analog Input 1 and Ground as a start permissive. If wiring is loose or damaged between the PLC to JUCB, the system will not start and will report a fault condition. Permissive OK for the MT is signaled when the analog input reads 1.92VDC (this is reached when all wiring is intact and K1 relay is closed). If the MT reads 4.14VDC at J14 Analog Input 1, the system will not receive a permissive start. If this does occur, check fuel temperature feedback. If this is operating sufficiently, check for loose wiring or damage to harness. The harness has built in resistors. It is expected to measure (with harness disconnected from relay contacts and from JUCB) 7.15 kohm between one end to the other end of the contactor connected to Relay pin 5 and JUCB Analog Input 1. A measurement of 48.7 kohm should also be present between wires connected into JUCB J14 Analog Input 1 and Ground. 450109 Rev A (April 2011) Page 9 of 9 This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction. Copy is uncontrolled; user is responsible for verifying current revision.PDF Image | Capstone Technical Support C200 v1.20 Software Release
PDF Search Title:
Capstone Technical Support C200 v1.20 Software ReleaseOriginal File Name Searched:
SB0107_C200_v120_Software_Release.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)