PDF Publication Title:
Text from PDF Page: 015
Capstone Turbine Corporation • 21211 Nordhoff Street • Chatsworth • CA 91311 • USA Technical Reference: Capstone MicroTurbine Installation and Permitting Guidelines is more important than service cost it is possible with the rolling option kits, available through Capstone. o FrontofGridConnectunit—Allunitsareoutfittedwiththestandarddoor,so they swing about a left hinge with a 762 mm (30 inch) radius. Also, the air inlets cannot be blocked as mentioned in the section about Inlet Air. A support column or other structure cannot be in front of the package. o FrontofStandAloneunit—Besidestheinformationabove,theC60/C65sthat have batteries for Stand Alone or Dual Mode operation have additional clearance requirements. The main battery is removed by pulling it straight out the front of the package. It cannot be rotated on its way out and it weighs about 295 kg (650 lbs). There are lifting and pulling features on the front of the battery and it is usually extracted with a winch or come-along strap. The standard service area does not include area for the equipment needed to pull the battery, but just for the battery. Once the battery is pulled out onto a pallet, it can be pulled sideways on a pallet jack. Keep this in mind when thinking about the concrete slab, floor-mounted plumbing, or other support structure. The entire area in front and to the side of the Stand Alone package cannot be violated. Unlike the other electrical modules that are usually serviced at the board level, the batteries are not field serviced and are replaced as one module. Also, the battery breaker is located on the front of the battery that is accessed by opening the door. The area in front of the door must be clear to meet local codes. o Rear—Theupperpanelandhoodisremovedbyremovingthe4boltsinthe corners of the panel. The lower panel is not removable, but UCB requires sufficient access. Also, the fuel enters the package through the lower panel. A support column or other structure could be in back of the package at the corners provided that there is still access to the panel fasteners, UCB, and fuel inlet. CopelandCompressor o Put it outside. It is fairly quiet, like a home air conditioner compressor. It is rated for outdoor use. It produces 30,000 Btu of heat at 1000 cfm so it is best to have outdoors and not heating the turbine inlet air or enclosure. o Top—Mostimportantaccesspanel,sodonotstackthesecompressorson shelves. o Front—Controlpanelandinletairdonotusuallyrequireremoval,but clearance is required for airflow and possible replacement of controller. o Rear—Electricalconnectionsandairoutletrequireclearanceforaccessand airflow. o Sides—The right side provides access to most components and fittings. The left side is less vital and could have less access if required. Again, consider locating the compressors outside and have the fuel option kits near the MicroTurbines. Unifinheatexchanger o Front—Thedisplaypanelisattachedtothefrontpanel,soifreplacementis required, the front panel must be removed. 410034 Rev E (December 2005) Page 15 of 16 This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respecttoequipmentpreviouslysoldorintheprocessofconstruction. PleasenotethatCapstoneisonlyresponsiblefortheMicroturbineandotherCapstoneproductsitsells,asprovidedforinCapstone’sProduct Specifications and warranties. Information provided in this document that relates to the system, as opposed to the Microturbine or other Capstone products, is not an indication that Capstone is taking responsibility for the systeminanywayandisprovidedonlyasgeneralguidance. CalculationsandtestingmustbeperformedtoverifythatdesignsolutionscomplywithalloftherequirementsofCapstone'sProductSpecification. All informationcontainedinthisdocumentisprovidedonan“asis”basis,anddoesnotaffectorchangeCapstone'sProductSpecificationsorwarranties. InnoeventwillCapstonebeliablefordamagesarisingdirectlyor indirectly from any use of the information contained in this document.PDF Image | Technical Reference Capstone MicroTurbine Installation and Permitting Guidelines
PDF Search Title:
Technical Reference Capstone MicroTurbine Installation and Permitting GuidelinesOriginal File Name Searched:
410034_Installation_Permitting.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)