PDF Publication Title:
Text from PDF Page: 009
Capstone Turbine Corporation · 21211 Nordhoff Street · Chatsworth · CA 91311 · USA Telephone: (818) 734-5300 · Fax: (818) 734-5320 · Web: www.microturbine.com Pre-Operational Checks (Contíd) Power-on Tests 1. Grid Connect: Close disconnect and interconnect breaker Stand Alone: Close battery breaker and push ‘BATT START’ key on the Display Panel. 2. Verify DPC Code from Display Panel and record: Version # 3. Grid Connect: Check phase voltages and frequency from the Display Panel and record: Phase A: VAC Phase B: VAC Phase C: VAC Frequency: Hz 4. Record communications baud rates from Display Panel: User Interface Port (bps) Maintenance Interface Port (bps) 5. Grid Connect: Adjust Grid Connect Protective Relay Function settings as required (in accordance with the utility interconnection agreement). 6. Stand Alone or Dual Mode: Adjust output voltage and frequency as required. 7. Stand Alone or Dual Mode: Adjust Stand Alone Protective Relay Function settings as required. 8. Adjust fuel index settings as required. Operational Checks WARNING: DO NOT EVER START THE MICROTURBINE WITH THE FUEL SUPPLY OFF. 1. Open the manual fuel shut-off valve. 2. Grid Connect: Set power output demand to maximum. Initiate a START. Verify that the MicroTurbine starts and loads normally. 3. Stand Alone: Switch the Battery breaker OFF, disconnect loads from the MicroTurbine output terminals. a. Switch Battery breaker ON. Press BATT START key, Initiate a START. Wait for ‘Ready To Load’. b. Load enable. Check phase rotation. Phase rotation is correct (Circle: Y N) Command system STOP. Wait for ‘Standby’. c. Switch Battery breaker OFF, reconnect loads. Switch Battery breaker ON. Initiate a START, Wait for ‘Ready to Load’. Load enable. Verify that the MicroTurbine loads normally. 4. Re-set the regulator output pressure as per section 2c under Fuel System (Pre-Operational Checks). This should be performed approximately two minutes after the MicroTurbine lights (output should be above 20 kW for Model 330 or above 40 kW for Capstone 60). This will ensure that the engine is near maximum fuel flow for this final adjustment of the pressure regulator. 5. After a five (5) minute run, initiate a STOP command. Verify that the MicroTurbine shuts down and goes into cooldown normally. 6. Initiate a start and run at full power for 15 minutes. Verify that the MicroTurbine operates normally. 512903-001rA (Jan 2002) 9 of 13 Commissioning Checklist This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the equipment specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | Commissioning Checklist - MicroTurbines
PDF Search Title:
Commissioning Checklist - MicroTurbinesOriginal File Name Searched:
512903 Commissioning Checklist.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)