PDF Publication Title:
Text from PDF Page: 018
Capstone Turbine Corporation • 21211 Nordhoff Street • Chatsworth • CA 91311 • USA Capstone MicroTurbine C200 Heat Recovery Module (HRM) User’s Manual 3.2.2.2 Temperature Display Setup The user can adjust the temperature controller to display the temperature in degrees Fahrenheit or Celsius. Use the input controls (Table 3) on the controller to set up the temperature display as follows: 1. Press the Setup button to enter the Setup mode. The Upper Display will show SET, and the Lower Display will show TUNING, which is the first Setup Group. 2. After the first Setup Group is displayed on the controller, press the Setup button again to cycle through the different Setup Groups. Continue to press the Setup button until DISPLY is shown on the Lower Display. This is the Display Setup Group. NOTE: You can also use the Up Arrow and Down Arrow buttons to scroll through the Setup Groups. 3. Once the Display Setup Group is selected, press the Function button. The Lower Row will show the first Function in the Display Setup Group, and the Upper Row will show the current value of the Function. Continue to press the Function button until the Lower Row shows UNITS, which is the Temperature Units Function. 4. Once the Temperature Units Function is selected, use the Up Arrow or Down Arrow button to select F for Fahrenheit, or C for Celsius. 5. Press the Function button to enter your selection into memory. 6. Press the Lower Display button to exit the Setup mode. 3.2.2.3 Setpoint Editing The user edits the value of the setpoint on the temperature controller to set the desired water temperature level. Use the input controls (Table 3) on the controller to edit the setpoint as follows: 1. The Upper Row on the screen should show the outlet water temperature (Process Variable), and the lower display should show the characters “SP” (Setpoint) followed by the current value of the setpoint. If these are not shown, press the Lower Display button until both the process variable and setpoint are shown. 2. Press the Up Arrow button to increase the value of the setpoint, and press the Down Arrow button to decrease the value of the setpoint. 3. The value entered will be stored in the setpoint after 30 seconds if no other key is pressed. To store the value immediately, press the Lower Display button again. NOTE: If controller power is removed before the setpoint value is stored, the new setpoint value is lost and the previous setpoint value is used at power up. NOTE: If the MA-Reset button is pressed accidentally while in automatic mode, the controller will switch to manual mode. Verify that the display indicates automatic mode. If the display indicates manual mode, press the MA-Reset button once to switch back to automatic mode. 400021 Rev B (October 2012) Page 18 of 26 Capstone reserves the right to change or modify, without notice, the design, specifications, and/or contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | Capstone MicroTurbine C200 Heat Recovery Module (HRM) User’s Manual
PDF Search Title:
Capstone MicroTurbine C200 Heat Recovery Module (HRM) User’s ManualOriginal File Name Searched:
400021B_HRM_UM.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)