PDF Publication Title:
Text from PDF Page: 011
9012 Internal Fault GDSP BRAKE OTMP Generator DSP Brake Overtemperature System Severity Level 2 Power is dumped into the brake resistors when the DC bus voltage exceeds its brake voltage set point, or when the engine speed exceeds its brake speed set point. The software declares a brake overtemperature fault when the brake overtemperature limit is exceeded. The fault is cleared when the brake temperature is lower than the reset temperature setting. Symptom Probable Cause Analysis Repair Solution The Brake temper- ature reached the Brake Overtem- perature Limit. The Brake Over- temperature Limit is not set properly Make sure that the power board PM is programmed properly, and it is supported by the installed control software. Re-program the power board PM. Excess offload operations Adjust the load operation so that no more than 5 times of offload operations per minute. Increase the time interval between each offload operation. Open/loose Connection Check the connection between E7, E8 and the brake resistors. Fix any loose or faulty connection. Brake resistors are burned DPC Power Board needs replacing. Replace DPC 9013 Internal Fault GDSP HTSNK SH Generator DSP Heat Sink Thermistor Short System Severity Level 6 The software declares a heat sink thermistor short fault when a temperature translation of greater than a predetermined value is calculated. Symptom Probable Cause Analysis Repair Solution The Generator has detected a short circuit condition of the Heat Sink Thermistor. Debris or water in package Check and clean connectors connecting J8 and J9 of the power board, and J12 of the control board. Check related cables and make sure that they are in good condition. Clean DPC. Faulty DPC Control Board DPC Control Board needs replacing. Replace DPC Control Board (See Document 513176) Faulty DPC Power Board DPC Power Board needs replacing. Replace DPC. Observe Safety Precautions - Refer to Safety Instructions for Details 430001-001 Rev D (June 2003) 10-11 Model C30 Troubleshooting Guide This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | SERIES 9000 FAULT CODES Generator Faults
PDF Search Title:
SERIES 9000 FAULT CODES Generator FaultsOriginal File Name Searched:
10_9000 Faults.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)