PDF Publication Title:
Text from PDF Page: 009
9011 Internal Fault GDSP HANDOFF Generator DSP Failed to Hand Off System Severity Level 6 The software declares a fail to hand off fault when the rotor position feedback signal does not match the open loop speed position command, after reaching a predetermined RPM value. Recommended Spare Parts • PM • DPC • IPM Power supply • Engine Symptom Probable Cause Analysis Repair Solution The Rotor position feedback does not match the open loop speed posi- tion command. The PM para- meters used to define the genera- tor start profile are set wrongly. Make sure that the right engine PM data is used and the engine PM is programmed properly. Re-program the engine PM. The engine PM is not supported by the generator DSP con- trol software. Make sure that the right engine PM data is used and the engine PM is programmed properly. Re-program the engine PM or change the version of the control software. Contact Capstone Technical Support. Open/loose Connection (Flex Harness) Unplug the flex harness between J12 on DPC Control Board and J8 on DPC Power Board. Check for damages. Re-connect the flex harness and ensure the connections are tight. Replace the Harness Loose Connections (Screw Terminals) Check connections at E1, E2, E3 - phases C, B and A (between the DPC Power Board and the generator inductors). The torque on the screws should be 25 lb-in. Check the connections between the generator inductors and the power wires leading to the generator. The torque on the Inductors should be 35 lb-in. Open the generator box and check the generator power connections. Check the torque on terminals A, B, and C from the DPC, terminals A, B, and C from the generator, and the E-shaped metal connector for the generator Neutral - all should be at 20 lb-in. Tighten wire connec- tions to the correct torque values Continued on next page Observe Safety Precautions - Refer to Safety Instructions for Details 430001-001 Rev D (June 2003) 10-9 Model C30 Troubleshooting Guide This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | SERIES 9000 FAULT CODES Generator Faults
PDF Search Title:
SERIES 9000 FAULT CODES Generator FaultsOriginal File Name Searched:
10_9000 Faults.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)