PDF Publication Title:
Text from PDF Page: 005
7003 Internal Fault MODE TRANSITION Mode Transition System Severity Level 4 This fault is declared in the Dual Mode and: 1. If in the Grid Connect operation, the required jumper/circuit on the UCB is not configured for Grid Connect operation. 2. If in the Stand Alone operation, the required jumper/circuit on the UCB is not configured for Stand Alone operation. Recommended Spare Parts • UCB • ECM Control Board Symptom Probable Cause Analysis Repair Solution Reports a Dual Mode Transition occurring Grid has gone away In Dual Mode operation the interlocks are set by the Dual Mode Controller to indicate Grid Connect or Stand Alone operation. When grid voltage goes or comes, this fault enables the system to transition modes. System clears fault automati- cally when transition is complete. WARNING: Allow system to continue through Dual Mode transition. Interlocks not set correctly Wiring connection from the Dual Mode controller or external device makes a transition out of Grid Connect or Stand Alone and does not successfully enable the following state. Check wiring connections to Grid Connect (J12-3) and Stand Alone (J12-2) Interlocks on the UCB. Option Port Harness? Interlock signals are carried from the UCB back to the ECM through the Harness. Ensure that these connections are secure and wire is dry and not damaged. Secure or dry Harness at UCB and ECM. Replace if damaged. UCB failed If all connections are secure, circuitry on UCB must not be functioning correctly. Replace UCB ECM Control Board failed The ECM Control Board has circuitry that communicates with the UCB. Assume this has failed. Attempt an ECM Control Board PM upload. Replace ECM Control Board. Observe Safety Precautions - Refer to Safety Instructions for Details 430013-001 Rev A (October 2002) 109 Model C60 Troubleshooting Guide This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | Overview SERIES 7000 FAULT CODES User Initiated Faults
PDF Search Title:
Overview SERIES 7000 FAULT CODES User Initiated FaultsOriginal File Name Searched:
12_430013_Series 7000.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)