PDF Publication Title:
Text from PDF Page: 015
17010 CHP TIN OP SH CHP Temperature Sensor In Open-Short System SSL: 2 CHP SSL: FW This error detects a failure of the water temperature measurement. The 17010 and 17011 faults are the most critical measurements in the CHP system. Without these parameters, it is not possible to avoid an overtemperature. When these faults occur, the MicroTurbine must shut down. Open circuit <= 21 °F (-6 °C) Short circuit >= 246 °F (119 °C). Symptom Probable Cause Analysis Repair Solution Water temperature exceeds limits. System unavailable Inlet RTD harness failed Remove the back panel of the HRM unit (where water input and outputs are located). 1. Is the inlet RTD cable connected? If No, go to 2. If Yes, go to 3. 2. Connect cable and start the unit. If the unit starts with- out faults, the problem is solved. If faults exist, go to 3. 3. Test RTD cable - disconnect from inlet RTD and CHP Control Board and check continuity of cable. If there is no continuity, go to 4. If there is continuity, go to 5. 4. Replace cable and start the unit. If the unit starts with- out faults, the problem is solved. If faults exist, go to 5. Inlet water tempera- ture sensor failed 5. Replace the inlet RTD and start the unit. If the unit starts without faults, the problem is solved. If faults exist, contact Capstone Technical Support. Water temperature is below 21 °F (-6 °C) Check water temperature by an independent means. Note: Surface temperature of the Header is a close approximation. Raise water temperature. Observe Safety Precautions - Refer to Safety Instructions for Details 430013-001 Rev C (July 2003) 14-15 Model C60 Troubleshooting Guide This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | Overview SERIES 17000 FAULT CODES Integrated CHP Faults
PDF Search Title:
Overview SERIES 17000 FAULT CODES Integrated CHP FaultsOriginal File Name Searched:
14_17000 Faults.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)