PDF Publication Title:
Text from PDF Page: 013
Capstone Turbine Corporation • 21211 Nordhoff Street • Chatsworth • CA 91311 • USA Technical Reference: Capstone MicroTurbine Installation and Permitting Guidelines Ensurethatchimneymaterialandthicknessmeetslocalcodes. Allow for condensation drainage if burning fuel or air containing H2S, per Fuel Gas codes. Ducting may need to be sloped, especially if burning fuel or air containing H2S. Silencers or baffles may be used, but consideration must be made for pressure drop and temperature rise. Pressure should be checked by placing a pressure sensor in a sampling port in the exhaust pipe above the MicroTurbine. Measure actual pressure to ensure that it is below the specified maximum. If the MicroTurbines are located in a closed room, several items must be considered. o The engine exhaust and room air exhaust will need to be ducted to the outside via separate ducts to prevent backflow from the engine into the room. o It is best to route each MicroTurbine’s exhaust to the outside in its own duct. If a single duct is used, backflow dampers are required on each MicroTurbine. o The exhaust discharge should be located away from the air inlet to the room to prevent hot air from getting re-ingested. o Insulating the engine exhaust ducts will decrease the heat loss to the room air and hence the room ambient air temperature. 410034-001 Rev D (October2004) Page 13 of 18 This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respecttoequipmentpreviouslysoldorintheprocessofconstruction. PleasenotethatCapstoneisonlyresponsiblefortheMicroturbineandotherCapstoneproductsitsells,asprovidedforinCapstone’sProduct Specifications and warranties. Information provided in this document that relates to the system, as opposed to the Microturbine or other Capstone products, is not an indication that Capstone is taking responsibility for the systeminanywayandisprovidedonlyasgeneralguidance. CalculationsandtestingmustbeperformedtoverifythatdesignsolutionscomplywithalloftherequirementsofCapstone'sProductSpecification. All informationcontainedinthisdocumentisprovidedonan“asis”basis,anddoesnotaffectorchangeCapstone'sProductSpecificationsorwarranties. InnoeventwillCapstonebeliablefordamagesarisingdirectlyor indirectly from any use of the information contained in this document.PDF Image | Technical Reference Capstone MicroTurbine Installation and Permitting Guidelines
PDF Search Title:
Technical Reference Capstone MicroTurbine Installation and Permitting GuidelinesOriginal File Name Searched:
c60l410034installguide.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)