PDF Publication Title:
Text from PDF Page: 011
5. Brake resistors With the Digital Multimeter in Resistance mode, measure the resistance of the brake resistor - it must be 7 ohms. F. Re-install Components When the troubleshooting procedure is completed, re-install all components back into their original positions by applying correct torque values specified in this section. Refer to the following tables for recommended torque values. 6. Inductors Check the resistance from the inductors (Generator side) to the chassis ground - there should be no shorts. CAUTION: It is important to apply the correct torque values when installing the removed components. Failure to do so will damage the components. LCM Torque Values Thread Size Torque Value (Lb in) 4-40 5 ± 0.5 6-32 9 ± 0.5 8-32 18 ± 1.0 10-32 30 ± 1.5 1/4-20 65 ± 3.0 M3 x 0.5 5 ± 0.5 M3 x 10 SEMS 10 ± 0.5 M3 KEP Nut 5 ± 0.5 M3.5 x 0.6 11 ± 0.5 M4 x 0.7 21 ± 1.0 M5 x 0.8 35 ± 1.5 M5 x 10 FH 35 ± 1.5 M5 x 12 SEMS 35 ± 1.5 M5 KEP Nut 20 ± 1.0 M6 x 1.0 66 ± 3.0 M6 x 12 SEMS 66 ± 3.0 M6 x 16 SEMS 45 ± 1.5 M6 x 18 SEMS 45 ± 1.5 M6 KEP Nut 45 ± 1.5 M6 Nut (Conical) 66 ± 3.0 M8 x 14 SEMS 90 ± 3.0 T1, T2, T3 (Contactor) 60 ± 3.0 W309 CABA 18 ± 1.0 ECM Torque Values Thread Size Torque Value (Lb in) 4-40 5 ± 0.5 6-32 9 ± 0.5 8-32 18 ± 1.0 10-24 30 ± 1.5 10-32 30 ± 1.5 1/4-20 65 ± 3.0 1/4-20 x 0.5 SEMS 66 ± 3.0 M3 x 0.5 5 ± 0.5 M3 x 10 SEMS (PCBA) 5 ± 0.5 M3 x 10 SEMS 10 ± 0.5 M3 x 16 SEMS (PCBA) 5 ± 0.5 M3 KEP Nut 5 ± 0.5 M3.5 x 0.6 11 ± 0.5 M4 x 0.7 21 ± 1.0 M4 x 8 SEMS 20 ± 1.0 M4 KEP Nut 15 ± 1.0 M5 x 0.8 35 ± 1.5 M5 x 10 FH 35 ± 1.5 M5 KEP Nut 21 ± 1.0 M5 KEP Nut (Fan) 35 ± 1.5 M6 x 1.0 66 ± 3.0 M6 x 12 SEMS 66 ± 3.0 M6 x 16 SEMS 45 ± 1.5 M6 x 18 SEMS 45 ± 1.5 M6 x 22 Spacer 20 ± 1.0 M6 KEP Nut 45 ± 1.5 M6 Nut (Conical) 66 ± 3.0 M8 x 14 SEMS 80 ± 3.0 Observe Safety Precautions - Refer to Safety Instructions for Details 430013-001 Rev C (July 2003) 1-11 Model C60 Troubleshooting Guide This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | Table of Contents for Series Fault Codes
PDF Search Title:
Table of Contents for Series Fault CodesOriginal File Name Searched:
C60_01A_Front Section.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)