PDF Publication Title:
Text from PDF Page: 030
Capstone Turbine Corporation Model C65 Hybrid UPS User’s Manual 3.2.2. Display Panel The local Display panel on the Hybrid UPS system has limited control capability. As with any Capstone Microturbine, the few control functions it does offer will not be available when the Hybrid UPS system is operating as part of a MultiPac, including the ability to start and stop the system. Once operating as an individual unit, some additional control commands become available. Note that the Display Panel will show whether the Display Panel itself, the User Port, or the Maintenance Port has control access. 3.2.3. PC with CRMS Software The CRMS software provides the capability for a PC to connect to each Hybrid UPS system, either through the Ethernet connection in the UPS Controller or while plugged directly into a unit using the Ethernet port on the serial-to-Ethernet converter. The converter provides connectivity to both the User and Maintenance Interface Ports. The User Port is reserved for communications with the UPS Controller, and the Maintenance Port is for CRMS. Refer to the CRMS User Manual (410013) for additional information. 3.3. Initial Setup and Commissioning Configuration and commissioning of a Hybrid UPS system requires a Capstone Authorized Service Provider using a PC with CRMS software, along with a UPS Controller. Once the Hybrid UPS system has been properly configured with all protective relay, communications, and other basic setup information, there should be no need to change this information during normal operation. All configuration data is stored in non-volatile memory in the Hybrid UPS systems themselves, as well as the UPS Controller, so loss of power will not prevent proper restarting of a system if required. As part of the commissioning process, your service provider will start the system and provide specific instructions on user operation and maintenance. Consult your Capstone Authorized Service Provider if the system is not operating as expected or requires a change to one or more configuration parameters. 3.4. System Start-up A MultiPac of Hybrid UPS system requires a UPS Controller to act as a master, and the UPS Controller provides the user interface to transition the system from a Standby Mode to either UPS Mode or High Efficiency Mode. In order to start, the Hybrid UPS systems must be connected to an external energy storage system, either individually or through a common DC bus. If the UPS Controller has lost power for an extended period, its internal UPS system will automatically go into a sleep mode to preserve power for just such a start attempt. The integral touch screen display on the UPS Controller will likewise go blank if there has been no user interaction for a preset time delay. The UPS controller provides several means to start the system as described below. Page 30 of 71 400027 Rev B (August 2013) Capstone reserves the right to change or modify, without notice, the design, specifications, and/or contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction. CAUTION: Using CRMS to request data faster than every 2 seconds may interfere with operation of the UPS Controller causing inadvertent operation or shutdown of the Hybrid UPS systems. Do not set any CRMS Data Acquisition or Record to File timers less than 2 seconds.PDF Image | Capstone MicroTurbine Model C65 Hybrid UPS User's Manual
PDF Search Title:
Capstone MicroTurbine Model C65 Hybrid UPS User's ManualOriginal File Name Searched:
400027B_UM_C65_HYBRID_UPS.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)