PDF Publication Title:
Text from PDF Page: 014
Capstone Turbine Corporation • 21211 Nordhoff Street • Chatsworth • CA 91311 • USA Capstone Gas Pack: User’s Manual If the system stops during operation, proceed as follows: 5. Consult your steps above. 1. 2. 3. 4. Determine if the MicroTurbine(s) have shut down due to an electrical or other fault. Refer to MicroTurbine User’s Manual (400001 or 400017) for how to read fault codes. If a MicroTurbine fault is present, take actions to clear the fault condition. The red Fault light in the Gas Pack may also be illuminated in the case of a compressor fault. If so, press the yellow Reset button on the Gas Pack console. If the Gas Pack red Fault light extinguishes and all MicroTurbine faults have been cleared, try restarting the system. Verify that electrical power is available at the Gas Pack and that the MicroTurbine is either connected to suitable grid voltage (if operating in Grid Connect mode) or is able to provide power in Stand Alone mode. If the Gas Pack is an AC version, the orange Power On light on the Gas Pack should be illuminated as soon as external power is provided to it. If the Gas Pack is a DC version, the Power On and light should illuminate as soon as DC power is available from the MicroTurbine. If these conditions are met, try restarting the system. Determine if the heat exchanger fan air inlet and the air vents are restricted in any way. This can cause excessive system temperatures, resulting in an over temperature fault condition. Clean or remove restrictions, if present, and restart the system. Verify that incoming gas pressure is within the system design specification. Inlet gas pressure must remain steady within the range of 0.2 to 10.0 psig during startup and normal load operation. Excessive inlet pressure produces excessive motor current and causes the inverter or circuit breaker to trip. Insufficient pressure trips out the Gas Pack Low Pressure Switch, shutting down the system. Adjust inlet gas pressure to achieve steady operation within the required range, if needed, and restart the system. If your Gas Pack system includes a regulator with pressure gauge at the inlet to each MicroTurbine, ensure that pressure is between 75 to 80 psig during operation. Authorized Service Provider if you are not able to resolve the problem using the NOTE If the system runs for a short period of time, stops and indicates a fault that can be reset immediately, it is likely that the fuel supply is insufficient for the application. If the system inlet pressure falls below the minimum 0.2 psig, the inlet pressure switch opens and the system stops. When this occurs, the pressure usually increases enough to reset the low pressure switch. 400012 Rev A (August 2007) Page 14 of 16 Capstone reserves the right to change or modify, without notice, the design, specifications, and/or contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | CAPSTONE GAS PACK USER’S MANUAL
PDF Search Title:
CAPSTONE GAS PACK USER’S MANUALOriginal File Name Searched:
400012A_Gas_Pack_UM.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)