PDF Publication Title:
Text from PDF Page: 034
CHAPTER 3 Capstone SYSTEM DESCRIPTION Acceleration The system controller waits in this state until the Generator Controller has transitioned the engine speed up to the minimum engine idle speed before transitioning to the next state. Run The system stays in this state until the engine is fully warmed up and the load command is set by the user. Once both of these conditions are met, the System Controller transitions to the Load state. Load In this state, power is exported. In Grid Connect, the system will meet the commanded power export of the user. In Stand Alone mode, the system will maintain output voltage at whatever power is required up to the limit of the MicroTurbine output. Recharge (Hot Standby) This state is only active for Stand Alone systems. In Stand Alone, it is critical to make sure the batteries are charged prior to shutting down. Therefore, the System Controller disables the main output power, but continues to produce power with the engine, thus allowing the battery controllers to fully charge the main system batteries. The time for this charge will vary with the existing health of the batteries at the time of shutdown. Once the batteries are fully charged, the System Controller continues to the next state. The system is also available to transition back to Load state, such as when commanded to return to Grid Connect mode after a utility outage. This state is also referred to as Hot Standby. Cooldown In this state, the System Controller turns off the Engine Controller, which turns off the fuel to the engine. Once the fuel is off, the System Controller monitors the engine temperature until it has dropped enough to stop the engine. It then transitions to the next state. Restart This state exists to allow the user to restart the MicroTurbine without completely shutting down first. The System Controller commands the system back to the lightoff speed and then transitions back to the Open Loop Light state. Shutdown In this state, the System Controller commands the Generator Controller to run the engine back down to the Liftoff speed and then quickly to zero speed. Once the speed of the engine is confirmed to be at zero, the System Controller disables the Generator Controller, the Load Controller, and the Battery Controllers (if the system is in Stand Alone mode). 410072 Rev A (January 2009) Page 3-13 Capstone reserves the right to change or modify, without notice, the design, specifications, and/or contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | CAPSTONE C1000 MICROTURBINE SYSTEMS TECHNICAL REFERENCE
PDF Search Title:
CAPSTONE C1000 MICROTURBINE SYSTEMS TECHNICAL REFERENCEOriginal File Name Searched:
410072A_C1000_TR.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)