PDF Publication Title:
Text from PDF Page: 024
CHAPTER 3 Capstone SYSTEM DESCRIPTION C1000 Container Each C1000 MicroTurbine generator system is housed in a 30-foot long container with five compartments. Three, four or five of these compartments are populated with 200 kW generator modules, depending on the model purchased. As previously stated, the 600 kW C600 model uses three 200 kW modules, the C800 uses four, and the C1000 uses five. Every container, for all C1000 models, has the same exterior dimensions, regardless of the number of power modules installed in the container’s five compartments. This leaves two empty modules on the C600 and one empty module on the C800. At a later time these empty compartments can be field retrofitted with a 200 kW power module if higher system power outputs or redundancy is desired in the future. The C1000 container is suitable for outdoor installations and is of a rugged design engineered to protect the MicroTurbine equipment from the elements. Two basic container configurations are available to meet installation and environmental needs. The standard container is suitable for most outdoor installations while the high humidity model is suitable for any combination of higher wind loads, high humidity locations, marine applications, or areas that require higher seismic ratings. Refer to the Enclosure paragraph in Chapter 2: Product Overview for more details on the standard container options. The individual 200 kW power modules share a common fuel header, control system and electrical output bus. The system is addressed from the single controller as one system, with a single aggregate power output rating. To the user, the package can be considered a single turbine generator set, with the advantages of higher efficiency over a wider operating range, higher availability and redundancy and the ability to upgrade to higher power outputs in the future. MicroTurbine Engine (or Turbogenerator) Each 200 kW power module within the C1000 series package is an integrated MicroTurbine generator that includes the combustion turbine (made up of a compressor, combustor, turbine, generator, and a recuperator) and the associated power electronics, control, and fuel system components required for power generation. The rotating components are mounted on a single shaft supported by patented air bearings and spin at a maximum speed of 60,000 RPM. The permanent magnet generator is cooled by the airflow into the MicroTurbine. The output of the generator is variable voltage, variable frequency AC. The generator is also used as a motor during start-up and cooldown cycles. Fuel System The MicroTurbine can efficiently use a wide range of approved hydrocarbon-based gaseous fuels, depending on the model. The C1000 Series MicroTurbine uses a single fuel header to power all installed power modules. A standard 4 inch 150# ANSI RF flanged gas inlet is available on the same end of the package as the controller and power connections. Each MicroTurbine power module includes an integral fuel delivery and control system. The standard system is designed for pressurized hydrocarbon-based gaseous fuels. Other models are available for low-pressure gaseous fuels, gaseous fuels with lower heat content, gaseous fuels with corrosive components, and biogas (landfill and digester gas) fuels. Contact your Capstone Authorized Service Provider for data on approved fuels and performance specifications. 410072 Rev A (January 2009) Page 3-3 Capstone reserves the right to change or modify, without notice, the design, specifications, and/or contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.PDF Image | CAPSTONE C1000 MICROTURBINE SYSTEMS TECHNICAL REFERENCE
PDF Search Title:
CAPSTONE C1000 MICROTURBINE SYSTEMS TECHNICAL REFERENCEOriginal File Name Searched:
410072A_C1000_TR.pdfDIY PDF Search: Google It | Yahoo | Bing
Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info
Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info
Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info
Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info
BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info
Publications: Capstone Turbine publications for microturbine and distributed energy More Info
FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info
CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info
Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info
CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)