TECH REF DMSC RB

PDF Publication Title:

TECH REF DMSC RB ( tech-ref-dmsc-rb )

Previous Page View | Next Page View | Return to Search List

Text from PDF Page: 053

Capstone Turbine Corporation  21211 Nordhoff Street  Chatsworth  CA 91311  USA Technical Reference: Dual Mode System Controller (DMSC) 12. Auxiliary contacts M1-A1 open, the normally open contacts of RL7 open, TR de-energizes, contacts TR and TR (NOTC) open and contact TR (NCTO) closes. Both the ON and OFF lines of the motor operator are now de-energized, therefore, the remote disconnect device (M1) remains in the closed position. Auxiliary contacts M1-A2 close, normally open contacts RL8 close, and the MicroTurbine Grid Connect enable is pulled low (enabled). Also, the latched relay LRL1 is reset. 13. The SWITCH CLOSED lamp (LP4) illuminates, and the SWITCH OPEN lamp (LP5) extinguishes. 14. When the disconnect device (M1) closes, the MicroTurbine and protected loads are connected to the utility. At this point, protected loads are re-energized. The total time protected loads are without power is less than five seconds. 15. The LOAD POWER lamp (LP1) illuminates. 16. Once M1 closes, the Start/Stop signal is opened by auxiliary switch contact M1-A1 causing it to become inactive, and the GC Enable signal is activated through auxiliary switch M1-A2. These inputs cause the MicroTurbine to begin the reconnect sequence to Grid Connect mode while the utility grid powers the protected load. 17. The reconnect sequence to Grid Connect mode takes a minimum of 5 minutes, as specified by IEEE 1547.1 and UL 1741. The user can adjust the internal reconnect timer on the MicroTurbine to delay the reconnect sequence from 5 to 30 minutes. The MicroTurbine also has a manual reconnect function if local regulations require manual intervention before connecting a power source to the utility grid. 410071 Rev. B (January 2009) Page 53 of 71 Capstone reserves the right to change or modify, without notice, the design, specifications, and/or contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.

PDF Image | TECH REF DMSC RB

PDF Search Title:

TECH REF DMSC RB

Original File Name Searched:

410071B_Dual_Mode_System_Controller_DMSC_TR.pdf

DIY PDF Search: Google It | Yahoo | Bing

Capstone Turbine and Microturbine: Capstone microturbines used and new surplus for sale listing More Info

Consulting and Strategy Services: Need help with Capstone Turbine, sizing systems, applications, or renewable energy strategy, we are here to assist More Info

Container Lumber Dry Kiln: Since 1991 developing and innovating dry kilns using standard shipping containers More Info

Supercritical CO2 Lumber Dry Kiln: Compact fast drying in 3 days or less for small amounts of wood and lumber drying More Info

BitCoin Mining: Bitcoin Mining and Cryptocurrency... More Info

Publications: Capstone Turbine publications for microturbine and distributed energy More Info

FileMaker Software for Renewable Energy Developing database software for the renewable energy industry More Info

CO2 Gas to Liquids On-Demand Production Cart Developing a supercritical CO2 to alcohol on-demand production system (via Nafion reverse fuel cell) More Info

Stranded Gas for low cost power Bitcoin Mining Using stranded gas for generators may provide breakthrough low power costs for cryptocurrency miners. More Info

CONTACT TEL: 608-238-6001 Email: greg@globalmicroturbine.com (Standard Web Page)